Pentax 645N - Exposure Compensation & Bracketing

mize
ABOUT
EXPOSURE
COMPENSATION
SNOLLVH3dO Q39NVAQV L| L| I
3
Purpose
The exposure compensation allows you to deliberately
overexposure (brighten) or underexposure (darken) a sub-
ject, or to compensate for difficult lighting conditions which
may fool the camera’s built-in exposure meter.
To set
1. Turn the exposure compensation dial to the desired
compensation value.
2. The exposure compensation dial locks at the [ 0 ]
position. To set the exposure compensation dial to
a position other than the [ 0 ] position, turn the
exposure compensation dial while holding down
the exposure compensation dial release button.
3. The bar graph indicates the compensation value
and [à] appear in the viewfinder.
* Exposure compensation does not work in the Bulb
Exposure Mode.
* The exposure compensation range is -3EV to «3EV in
0.5EV step.
* Moving one bar on the bar graph indicates 0.3EV step.
* When exposure compensation is used in the Metered
Manual Mode, the bar above the bar graph indicates
under or overexposure, it is not indicating the exposure
compensation value. [ 8] is displayed.