Pentax D-BG4 - Attaching the Battery Grip to the Camera

1
Open
the battery grip connection cover on the camera, and remove
the interface
pins cap on the battery grip.
2 Attach the battery grip to the camera by fitting the interface pins and attachment
screw
of
the battery grip to the battery grip connection
terminal
and tripod socket
of
the camera as shown above.
3
Secure the battery grip by turning the attachment
wheel firmly
in
the direction
of
the arrow as shown above.
Lt
CAUTION
• Make sure the camera and the battery grip are turned off before attaching.
• Leave the cap on when not using the battery grip. Do not touch the interface pins with the cap off. You can
store the interface pins cap
in
the cavity
of
the battery grip (see
illustration
in
step 2).
•
You can store the battery grip connection cover
of
the camera
in
the cavity
of
the battery grip after removing
from the camera
in
step 1 (see
illustration
in step 2). When storing the cover, push it down straight with
12 your both thumbs.