Pentax Optio 50 - Setting the Date and Time

7
1. Set the mode dial to and use
the four-way controller (X) to select
[Set-up2] menu.
 [Set-up2] of the set-up menu is
displayed.
2. Select [Date Adjust] with the four-
way controller (T).
3. Use the four-way controller (WX)
to select the date type.
4. Press the button.
 The Date Adjust screen appears.
5. Use the four-way controller (WX)
to select itemís field and adjust the
value for the date and time with the
four-way controller (ST).
6. After confirming all settings are
correct, press the button.
Setting the Date and Time
Set-up1 Set-up2
OK :
1 / 5
Date Adjust
Video Out
Language
Brightness
PAL
English
d/m/y
Date Adjust
0 2 / 0 1 / 2 0 1 0
0 4 : 0 0
OK :
Select :