12
An explanation of how to display / copy images using ACDSee™ is
shown below.
1 Turn your computer on.
2 Turn your camera off and connect it to the PC with the
USB cable.
Confirm that the SD Memory Card / MultiMediaCard is inserted in
the camera.
3 Turn your camera on.
The Device Detector screen is displayed automatically.
If the Device Detector screen is not displayed, display/copy the
images following the steps in “When the Device Detector screen is
not displayed.” on the 13 page.
4 Confirm that [Copy images to
hard drive] and [Launch
ACDSee™] are checked, and
click [Next].
Displaying and Copying Images to your PC
To Next Page
Loading...
