17
1 Double-click the [Safely
Remove Hardware] icon in the
task bar recognized area.
2 Click [PENTAX USB DISK
Device] and click [Stop].
3 Click [PENTAX USB DISK
Device] and click [OK].
4 When a message is displayed
permitting removal, turn the
camera off and disconnect the
USB cable from your camera
and PC.
There is no hot plug icon in Windows 98 / 98 SE. Confirm that the
status lamp (green) has turned off before disconnecting the camera,
simply turn off the camera and disconnect the USB cable.
Windows XP
Windows 98 / 98 SE
To Next Page
Loading...
