6
When you have finished the settings, press the OK
button when the clock reaches O0seconds.
The camera is ready to take a picture.
Press the OK button again after pressing the OK button when the
clock reaches O0 seconds to return to Capture mode when you set
date and time except the initial settings.
o For an accurate time setting, when you have finished the settings,
press the OK button when the clock reaches 00 seconds
• You can cancel the settings operation and switch to Capture mode by
pressing the MENU l Fn button when the initial settings screen is
displayed. If this is done Lheinitial settings screen will be displayed
next time you turn the camera on
• You can change the settings after they have been made. Refer to
Changing the Date t Time" (p.116)
To Next Page
Loading...
