2
!!!!!_:.................
You can take pictures using the remote control F (optional).
1 Press the ®i_ button in Capture
mode to display i_ on the LCD p 198
monitor.
The self-timer lamp will blink and the camera
is ready to take pictures.
_:: 2 Press the shutter release button on
the remote control unit.
Theself-timerlampwillblinkrapidlyandthepicturewi,betakenafter
approximate,ythreeseconds
.........................[ ]
P,ay,n0Bac,,ma0esandSound_p._
,,,.J_:0o_",Theb0_0osonthecameracanbeused,nthesameway.
, Please ensure that the remote Control unit is no more than 5 meters
away from the front of the Camera
, The distance at which the remote control unit operates may be
reduced when taking pictures against the light.
, Press the "_-_' button in Step i to display i on the LCD monitor to
take a picture immediately after pressing the Shutter [e!ease button
on the remote control unit.
• Life of the Battery for the Remote Control Unit
A signal can be sent from the remote control unit to the camera
approximately 30,000 times. If the battery needs changing, contact your
nearest Pentax customer service center. (A charge is made for
replacing the battery.)
il
To Next Page
Loading...
