Pentax Optio S55 - Taking Panorama Pictures (Panorama Assist Mode)

63
Taking Pictures
4
+
You can take a number of images and join them together to form a
panorama picture. The software (ACDSee for PENTAX) on the CD-ROM
(S-SW32) provided with the camera and a computer are necessary for
joining the images. The Panorama Assist mode enables you to overlap
the edges of the images so that they are easier to join together into a
panorama picture.
1 Set the mode dial to +.
2 Press the four-way controller (3).
The screen for choosing a digital effect mode appears.
3 Use the four-way controller
(2345) to select F (Panorama
Assist).
4 Press the OK button.
5 Use the four-way controller to
choose the direction in which the
images will be joined.
4 Joins the images at the left.
5 Joins the images at the right.
2 Joins the images at the top.
3 Joins the images at the bottom.
The example shows the images when 5 is selected.
Taking Panorama Pictures (Panorama Assist Mode)
1
4, 8
2, 3, 5
6, 7
Panorama Assist
OK
OK
O K
OK
Set shift
S e t s h i f t
direction
d i r e c t i o n
Set shift
direction