Pentax PC-330 - Camera Setup; Attaching the Strap; Inserting the Battery

ATTACHING THE STRAP (Fig. 1)
1. Insert the loop at the end of the Strap under the
Strap Eyelet.
2. Insert the other end of the Strap through the
loop and tie the Strap onto Strap Eyelet.
INSERTING THE BATTERY
I.Open the Battery Chamber Cover In the
direction of the arrow by pushing it out. (Fig. 2)
2. Insert two AA-size batteries, checking that (+)
and (-) on the battery are aiigned according to
the polarity information inside the Battery
Chamber.
3. Close the Battery Chamber Cover by Pushing it
until it latches.
Notes:
• Do not use Nickel Cadmium batteries.
• With the battery inserted incorrectly, the camera
will not work. Make sure the battery is installed
as shown in ( Fig. 3 ).
• Remove AA batteries from the camera when you
do not expect to use it for a long period time.
• Don’t try to break up or recharge the battery or
throw it into fire.
• Keep the battery out of the reach of chiidren.
8