Pentax Zoom 70-R - Film loading

2. FILM LOADING First, swildi off ixiwer by MllinQ the ^
D Slide the back cover release lever in the direction of
the arrow as illustrated to open the back cover.
B Place the film cartridge in the film chamber, fitting its
flat side on the top of the rewitxl shaft.
B Pull the film leader out far enough from the cartridge
to reach the take-up spool O. Aligh the tip with the
film leader end mark
Notes:
• Make sure the film perforations properly engage the
sprocket teeth ©.
• Make sure the film is properly placed between the
guide rails O.