Pentax Zoom 70-R - Page 13

• Make sure the film is taut as illustrated. Take up any
slack in the film by pusing it back into the cartridge.
• If the end of the film leader is extremely bent,
straighten it or cut off the bent portion.
□ Close the back cover. The film automatically
advances to the first frame.
When "{“ appears in the exposure center on the LCD
panel, the film automatically stops winding. The
indication as shown above appears.
Notes:
• If "I” does not appeeu' on the LCD panel, the film is not
properly loaded. Reload the film.
• After the shutter is released for each exposure, the film
automatically advances to the next frame.
®