Pentax Zoom 90 - Dual-Frame Self-Timer

Notes on Self-Timer and Dual-Frame Self-Timer:
• To cancel the self-timer after it has been started, press
the drive or mode button.
• To restore the Normal Auto and Single-Frame Shooting
modes, press the clear button ( C )• This will also can¬
cel the Self-Timer.
• When using flash with the Self-Timer or Dual-Frame
Self-Timer mode, make sure the flash is charged (the
red lamp glows) before operating either timer feature.
When the battery mark (CTIZ]) appears on the LCD
panel, the camera may not operate. Replace the
batteries (see page 37).
In this mode, you can take two
self-timer pictures in quick
succession.
Press the shutter release but¬
ton. The first frame will be
exposed after approx. 10
seconds, then the second
frame will be exposed approx. 5 seconds after the first
Note that focus for both shots is fixed in the first frame.
@