Pentax Zoom 90 - Multi-Exposure

1. Activate the Multi-Exposure mark ( ME I on the LCD
panel.
2. Press the shutter release button to shoot an initial expo¬
sure. The film will not advance, and the normal Single-
Frame Exposure mode will be restored.
3. Recompose the frame, and press the shutter release
button to shoot the second exposure. {After the second
shot, the film will be rewound.)
To expose more than twice:
Activate the Multi-Exposure mark before pressing the
shutter release button for the second exposure. After the
last exposure, the film will wind to the next frame.
Notes:
• The date will be exposed during the process of step 3
above.
• Repeated multiple exposures tend to overexpose a
frame, so it’s recommended that you expose a frame
just twice or so at most
• When using Multi-Exposure, you can usually get best
results with dimly-lit backgrounds, such as those in
night scenes.