Pentax ZX-5 - Attaching the Lens

BASIC
OPERATION
(PREPARATION)
18
(3) ATTACHING THE LENS
1 2
1. Remove the body mount cap O and rear lens cap
% as shown in the illustration.
• The body mount cap is designed to protect the cam¬
era against scratches and dust at the factory. For stor¬
age. the optional accessory "Body Mount Cap K' is
available.
2. Align the red dots on the camera and lens mount, at¬
tach the lens to the camera body, and turn it fully to
the right until you hear a click.
• Ensure that the camera’s drive mode switch in the
1 L I position before attaching an FA zoom lens to
prevent unexpected operation of the lens.