Pepperl+Fuchs KCD2-SR-1.LB - Manufacturer Information; Relevant Standards and Directives

Safety Manual SIL KCD2-SR-(Ex)*(.LB)(.SP), HiC282*
Introduction
2014-09
5
A fault is signalized by LEDs acc. to NAMUR NE44 and a separate collective error
message output.
The KC devices are available with screw terminals or spring terminals. The type
code of the versions of the KC-devices with spring terminals has the
extension ".SP".
The KCD2-SR-(Ex)*(.LB)(.SP) is a single device for DIN rail mounting while the
HiC282* is a plug-in device to be inserted into a specific Termination Board.
1.3 Manufacturer Information
Pepperl+Fuchs GmbH
Lilienthalstrasse 200, 68307 Mannheim, Germany
Up to SIL2
1.4 Relevant Standards and Directives
Device specific standards and directives
 Functional safety IEC 61508 part 1 – 2, edition 2000:
Standard of functional safety of electrical/electronic/programmable electronic
safety-related systems (product manufacturer)
 Electromagnetic compatibility:
- EN 61326-1:2006
- NE 21:2006
System specific standards and directives
 Functional safety IEC 61511 part 1, edition 2003:
Standard of functional safety: safety instrumented systems for the process
industry sector (user)
KCD2-SR-1.LB(.SP)
KCD2-SR-Ex1.LB(.SP)
KCD2-SR-2(.SP)
KCD2-SR-Ex2(.SP)
HiC2821, HiC2822