2017-04
8
Functional Safety KFD2-SH-Ex1(.T)(.OP), KHA6-SH-Ex1
Product Description
2.2 Interfaces
The device has the following interfaces.
• Safety relevant interfaces: input, output I, output II
• Non-safety relevant interfaces: fault indication output, power supply
2.3 Marking
2.4 Standards and Directives for Functional Safety
Device-specific standards and directives
System-specific standards and directives
Note!
For corresponding connections see datasheet.
Pepperl+Fuchs GmbH
Lilienthalstraße 200, 68307 Mannheim, Germany
Internet: www.pepperl-fuchs.com
KFD2-SH-Ex1, KFD2-SH-Ex1.T, KFD2-SH-Ex1.T.OP,
KHA6-SH-Ex1
Up to SIL 3
Up to PL d
Functional safety IEC/EN 61508, part 1 – 2, edition 2010:
Functional safety of
electrical/electronic/programmable electronic
safety-related systems (manufacturer)
Machinery Directive 2006/42/EC • EN/ISO 13849, part 1, edition 2015:
Safety-related parts of control systems
(manufacturer)
• IEC/EN 62061,
edition 2005 + A1:2012/2013 + A2:2015:
Safety of machinery – Functional safety of safety-
related electrical, electronic and programmable
electronic control systems
Functional safety IEC/EN 61511, part 1, edition 2003:
Functional safety – Safety instrumented systems for
the process industry sector (user)
To Next Page
Loading...
Need help?
General
