Need help?Do you have a question about the Pepperl+Fuchs KFD2-STC5-Ex2 and is the answer not in the manual?
General| Brand | Pepperl+Fuchs |
|---|---|
| Model | KFD2-STC5-Ex2 |
| Category | Power Supply |
| Language | English |
Target Group, Personnel and Intended Use of the device in functional safety applications.
Explanation of warning and informative symbols used throughout the manual for safety.
Details the function of various HiD and KFD2 series devices for intrinsic safety and isolation.
Details the safety relevant and non-safety relevant interfaces of the devices.
Provides information on the manufacturer and product identification markings.
Lists device-specific and system-specific standards for functional safety.
Discusses system structure for Low Demand and High Demand modes of operation.
Defines Safe Failure Fraction (SFF) and its calculation for safety loops.
Lists assumptions for SIL 2 and SIL 3 applications and requirements for SFF.
Describes the safety function, safe state, and reaction time of the devices.
Illustrates connection configurations for SIL 2 and SIL 3 applications.
Presents characteristic safety values (PFD, SFF, HFT) for various device types.
Discusses the concept of useful lifetime and its impact on failure rate calculations.
States that device configuration is not necessary and not possible.
Details requirements, equipment, procedures, and specific setups for proof testing devices.
Procedures for maintaining, repairing, and replacing the device safely.
To Next Page
