VTBAL401
V. 01 – 02/10/2018 5 ©Velleman nv
6. Operation
6.1 General Operation
1. Place the scale on a solid, level and non-slippery surface.
2. Switch on the scale. The scale is ready-to-use when the
display shows 0.
3. Place the item to be weighed or the tare item in the middle
of the weighing platform.
4. To tare an item, tap the tare button. Place the item to be
weighed on the scale.
5. The weight is displayed.
6.2 Unit Conversion
Press mode button until the desired weighing unit is displayed.
6.3 Calibration
1. Hold the mode button pressed until the scale enters the
calibration mode.
2. Briefly press the mode button. The required weight appears
on the display.
3. Place the required weight in the middle of the weighing
platform.
4. The scale will calibrate automatically and return to the
normal weighing mode.
6.4 Error Indications
Battery power running low.
Overloaded. Remove excess weight.
To Next Page
Loading...
Need help?
General
