What to do if my Perel WC221 has no transmitter reception?
If your Perel Weather Station isn't receiving the transmitter signal, try these steps: * Check the transmitter batteries. * Disconnect the power to both the weather station and transmitter, wait a few minutes, and then reconnect them. * Move the transmitter closer to the weather station. * Check for any sources of interference.
How to fix a Perel Weather Station with no display?
If there is no display on your Perel Weather Station, ensure the batteries are correctly inserted with the correct polarity. If the issue persists, try replacing the batteries.
General| Temperature resolution | 0.1°C |
|---|---|
| Temperature accuracy | ±1°C |
| Humidity resolution | 1% |
| Humidity accuracy | ±5% |
| Power (main unit) | 2 x AA batteries |
| Radio frequency | 433 MHz |
| Display | LCD |
| Power supply | Battery |
| Indoor temperature | 0°C to 50°C |
| Power (remote sensor) | 2 x AAA batteries |
| Humidity range | 20% to 95% |
To Next Page