Perfect Aire PAU13 User Manual (English)

Questions and Answers:

M
Marcus WalkerAug 13, 2025
What to do if my Perfect Aire PAU13 Humidifier has no mist / little mist / mist stuck?
- S
  stevengallagherAug 13, 2025
  If your Perfect Aire Humidifier isn't producing mist, or the mist seems stuck, several factors could be at play. First, ensure the base isn't overfilled; if it is, empty it and restart the unit. Check the water tank level and add water if it's low. Make sure the power/output knob is turned on by rotating it clockwise. Ensure the humidifier is placed on a flat surface. If there's scaling on the nebulizer/transducer, clean it according to the instructions. If you cleaned the tank with the wrong type of cleaner, thoroughly clean the water tank with fresh water and let it dry completely. Also, dirty or stale water can cause this issue, so clean the unit and refill with fresh water.
K
Katherine McleanAug 17, 2025
Why is there condensation on windows or machine when using Perfect Aire PAU13?
- S
  Sara FisherAug 17, 2025
  If you notice condensation on windows or the machine when using your Perfect Aire Humidifier, it's likely that the room is too small or too humid. To resolve this, try turning down the mist volume or turning the unit off completely.
Z
Zachary ThompsonAug 20, 2025
What to do if my Perfect Aire PAU13 is leaving a damp table or floor?
- M
  Michelle HansonAug 21, 2025
  If your Perfect Aire Humidifier is leaving a damp table or floor, it could be due to a couple of reasons. First, the unit might be too far from the edge of the table or too close to the floor; move it closer to the edge so the mist has more time to disperse, and avoid placing it on the floor. Also, check if the base has overflowed, which could be caused by a tank cap that isn't securely attached or needs replacement.
K
Kari ThompsonAug 25, 2025
How to fix excessive noise from Perfect Aire PAU13 Humidifier?
- R
  Rachel CurryAug 26, 2025
  If your Perfect Aire Humidifier is producing excessive noise, it might be due to vibration between the humidifier and the surface it's on. To fix this, place the unit on a stable, waterproof surface. Another possible cause is a low water level in the water tank, so ensure you fill the water tank.
A
abrownAug 28, 2025
What to do if the power light is off on my Perfect Aire PAU13?
- R
  Robert JonesAug 28, 2025
  If your Perfect Aire Humidifier's power light is off, there are a couple of things to check. First, make sure the unit is properly plugged in and that you turn on the power/output adjustment knob. If it's plugged in, the wall outlet might not have power; check the circuit and fuse, and try another socket.
J
Joshua MedinaSep 1, 2025
Why does my Perfect Aire PAU13 Humidifier unit / mist have a peculiar smell?
- M
  Michelle WilliamsSep 1, 2025
  If your Perfect Aire Humidifier is emitting a peculiar smell, it could be due to a couple of reasons. If it's a new unit, air it out in a cool place for 12 hours without the tank on the unit. Alternatively, the water might be dirty or stale; thoroughly clean the unit and place fresh water in the tank.
T
Tony HopkinsSep 4, 2025
How to prevent white dust from Perfect Aire PAU13 Humidifier?
- J
  jennifersinghSep 4, 2025
  If you notice white dust being emitted from your Perfect Aire Humidifier, it's likely due to a high mineral content in your water. To resolve this, switch to using distilled or filtered water. Additionally, clean the nebulizer according to the provided instructions.
E
Elizabeth MurphySep 8, 2025
What causes scaling on the nebulizer / transducer of Perfect Aire Humidifier?
- J
  Justin WatersSep 8, 2025
  If you observe scaling on the nebulizer or transducer of your Perfect Aire Humidifier, it's likely due to hard water. To address this, use distilled or filtered water in the unit.