Perfect Aire PROAIRE SPOT6800

Questions and Answers

M
Melissa JacksonAug 6, 2025
Why is my Perfect Aire PROAIRE SPOT6800 Accessories unit not operating?
- K
  Keith MartinezAug 6, 2025
  Your Perfect Aire accessory might not be operating due to a loose or unplugged power cord. Make sure to securely plug the unit into the wall outlet and ensure the outlet has sufficient power. Another potential cause is a burnt fuse, which should be replaced by a professional or certified technician.
V
vmcgeeAug 17, 2025
What to do if my Perfect Aire PROAIRE SPOT6800 unit is not cooling?
- M
  Monica SmithAug 17, 2025
  If your Perfect Aire accessory isn't cooling, several factors could be responsible. Here's what to check: * A dirty heat exchanger: Clean the heat exchanger surface to ensure proper airflow. * Hot exhaust fan failure: Repair or replace the hot exhaust fan or blower. * High ambient temperature: Avoid operating the unit in areas with excessively high temperatures. * Damaged compressor capacitor: Replace the compressor capacitor. * Blocked refrigerant tubing: Replace the blocked refrigerant tubing. * Incorrect input voltage: Use the correct voltage. * Compressor overload protection: The unit will restart once the compressor cools down. * Compressor motor failure: Repair or replace the compressor.
C
Charles BryantAug 27, 2025
How to fix condensate leakage in Perfect Aire Accessories?
- J
  Jennifer CalderonAug 27, 2025
  If you notice condensate leakage from your Perfect Aire accessory, the following issues might be the cause: * Clogged drainpipe opening: Clean out any residue or debris in the drain pipe. * Improperly installed condensate tank: Remove and reinstall the condensate tank correctly. * Dusty or filthy filter screen: Remove and clean the filter. * Stuck condensate float switch: Turn off the unit and empty the condensate tank before using it again. * Full condensate tank: Gently shake the tank to dislodge the float switch. * Damaged condensate tank: Repair or replace the tank.

Summary

Installation Instructions

Cold Air Exhaust Hose Assembly

Instructions for assembling the cold air exhaust hose and connecting it to the unit.

Attach Cold Air Exhaust Hose Assembly to Unit

Steps for securely attaching the prepared exhaust hose assembly to the main unit.

Operation Instructions

Compressor Overheat Protection

Explains the unit's safety feature that shuts down the compressor due to overheating.

Water Alarm and Indicator

Details the condensate full alert, its sound buzzer, and the compressor/fan stop condition.

Maintenance & Care Guide

Filter Cleaning Procedure

Step-by-step instructions for cleaning the unit's filter screen.

Correct Disposal of This Product

The device is a ProAire Spot Cooler, model SPOT6800, designed for localized cooling.

Function Description

The ProAire SPOT6800 is a portable spot cooler that provides targeted cooling. It operates by drawing in ambient air, cooling it, and then expelling the cold air through an adjustable outlet hose. Hot exhaust air is expelled from the back of the unit. The unit is equipped with a condensate tank to collect water removed from the air during the cooling process. A key safety feature includes a compressor overheat protection system that temporarily shuts down the unit if the compressor overheats due to high/low voltage or high ambient temperatures. It also features a water alarm that activates when the condensate tank is approximately 75% full, at which point the compressor and fan motor will stop operating.

Important Technical Specifications

Model Number: SPOT6800
Cooling Capacity: 5300 Btu/hr
Voltage/Phase/Hz: 115V/1Ph/60Hz
Rated Current: 7.1 A
Indoor Air Flow: 135 ft³/min. (230 m³/h)
Refrigerant Type: R410a
Refrigerant Amount: 10.6 oz. (300g)
Ambient Temperature Range: 68 °F - 109 °F (20 °C – 43 °C)
Net Weight: 56 lbs (25.5 kg)
Gross Weight: 62 lbs (28.3 kg)
Product Dimension (Width/Depth/Height): 18.3 in/11.3 in/23.1 in (465287586) mm

Usage Features

The spot cooler is designed for straightforward operation and includes several user-friendly features:

Power Control: The unit is powered ON by pressing the power switch to the “I” position, which immediately starts the compressor and fan motor. To power OFF, the switch is moved to the “O” position.
Startup Delay: If the unit is powered off or experiences an electrical interruption, there is a minimum three-minute delay before it resumes operation to protect the compressor.
Adjustable Air Direction: The cold air outlet hose assembly can rotate 360 degrees and be moved up and down by approximately 150 degrees, allowing precise targeting of the cooled air. Users are advised to hold the elbow for adjustment rather than directly holding the cold air duct.
Condensate Management: The unit features a condensate tank that collects water. When the tank is approximately 75% full, a "Condensate Full" sound buzzer activates, and the compressor and fan stop. To empty, the unit must be turned off, the tank removed, emptied, and then re-installed. After re-installation and powering on, there is a 3-minute delay before normal operation resumes. It is crucial to empty the tank before moving the air conditioner to prevent spills.
Installation: The cold air exhaust hose assembly attaches to the unit via locking tabs and screws. Installation requires basic mechanical and electrical skills and should be performed by a qualified professional, adhering to local codes and ordinances.
Placement Guidelines: For optimal performance and safety, the air inlet and cold air duct should be at least 12 inches away from walls and other obstacles. The hot air outlet requires at least 32 inches of clearance. The unit must be placed on a flat and level surface to prevent safety hazards and condensate leakage. It should not be operated in wet or damp places, and obstacles should not be placed in front of the air inlet, cold air duct, or hot air exhaust.

Maintenance Features

Regular maintenance is essential for the spot cooler's efficiency and longevity:

Filter Cleaning: The screen filter should be cleaned periodically to prevent dust and debris buildup, which can impede airflow and cause frosting or malfunction of the heat exchanger. To clean, shut off the unit, vacuum off loose dust, rinse with clean water, and re-install once dry.
General Checks: Before performing any maintenance or checks, the power cord must be unplugged.
Exterior Cleaning: When cleaning the exterior, avoid using chemical agents or other cleaning solutions that could damage the surfaces.
Cord and Screw Inspection: Regularly check the power cord for damage and replace it if necessary. Also, inspect for any loose screws and tighten them as needed.
Long-Term Storage: Before storing the unit for an extended period, ensure the condensate tank is checked and any remaining condensate is emptied. The air conditioner must be stored upright; it should not be laid horizontally or upside down. Storage locations should be free from high temperatures, rain, or direct sunlight.
Condensate Tank Float Device: If the unit has not been operated for a long time, the condensate tank should be checked to ensure the float device inside is intact. Proper installation of the condensate tank is crucial to prevent alarms, malfunctions, or leakage.

The device is designed for safe operation, with warnings against storing it with condensate, drinking drained water, inserting hands into vents, or operating it in explosive/combustible environments. If repairs are needed, contact the after-sales service department. Proper disposal of the product and its electronic accessories is emphasized to promote sustainable reuse and prevent environmental harm.