What to do if the Perfomance Tool Other handle lowers under load?
If the handle lowers under load, it may be that the valve is not closing completely. To seat the valves: a.) Close the release valve. b.) With the jack in a fully lowered position, manually raise the lifting arm as high as possible. c.) Open the release valve and allow the jack to descend to the lowered position.
How to fix a Perfomance Tool Other that will not lift a load?
If your jack won't lift a load, it could be due to a couple of reasons. First, the power unit might be low on fluid. To fix this, with the jack on a level surface and in the down position, remove the filler plug and add clean hydraulic jack fluid until it reaches the level of the filler. Another reason could be that the power unit is air bound. To resolve this, open the release valve a minimum of 2 full turns and pump the handle a minimum of 20 full strokes to purge air from the system.
Owner/operator responsibility to study all warnings, operating, and maintenance instructions before use.
Instructions for unpacking the product and inspecting it for damage that may have occurred during transit.
Step-by-step guide for assembling the jack, including handle attachment and securing components.
Details on the jack's capacity, lift height, base dimensions, and other technical specifications.
Critical safety instructions for operating the jack, including capacity limits, surface requirements, and personal protection.
Notice regarding chemical content in product and packaging that may cause cancer or reproductive harm.
Steps to prepare the jack before use, including opening the release valve and distributing hydraulic fluid.
Detailed instructions on how to raise and lower a vehicle using the jack, including safety support measures.
Recommended monthly maintenance, lubrication points, and general inspection for proper operation.
Procedure for changing the hydraulic oil, including oil type, volume, and purging air from the system.
Instructions on how to properly press the oil valve for oiling procedures or maintenance tasks.
Visual representation of the jack's components with numbered parts for identification.
Common jack symptoms, potential causes, and recommended procedures to correct operational issues.
Details of the manufacturer's warranty, coverage, exclusions, and limitations for the product.
General| Brand | Perfomance Tool |
|---|---|
| Model | W1645 |
| Category | Other |
| Language | English |
To Next Page