EasyManua.ls Logo

Perfomance Tool W2969 - User Manual

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DIGITAL AUTOMOTIVE
MULTIMETER
OWNER'S MANUAL
Stock Number W2972/W2969
FOR YOUR SAFETY,
please read these instructions carefully and retain them for future use.
WARNING!
It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance instructions contained
on the product label and instruction manual prior to operation of this product. The owner/operator shall retain product
instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels and while in use,
maintaining the unit in good working order. If the owner and/or operator are not fluent in English, the product warnings and
instructions shall be read and discussed with the operators’ native language by the purchaser/owner or his designee.
Make sure that the operator comprehends its contents. Safety information shall be emphasized and understood prior to
usage. The product shall be inspected per the operating instructions.
Users of this product must fully understand these instructions. Each person operating this product must also be of sound
mind and body and must not be under the influence of any substance that might impair their vision, dexterity or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service department at: 1-800-426-1262 between
6:30 a.m. and 4:30 p.m. Pacific time.
Due to continuing improvements, actual product
may differ slightly from photo shown.
Question and Answer IconNeed help?

Do you have a question about the Perfomance Tool W2969 and is the answer not in the manual?

Summary

Safety Information

Basic Tests

Voltage Function AC - DC

Testing AC and DC voltage measurements.

DC Current Function

Procedures for measuring DC current.

Resistance Test

Steps to measure electrical resistance.

Continuity Test

Checking for open or closed circuits.

Diode Test

Procedure for testing diodes.

Mechanical Tests

Battery;Starting;Charging

No Load Battery Test

Checking battery charge without load.

Cranking Battery Load Test

Testing battery voltage under load.

Battery Current Draw

Measuring battery drain with ignition off.

Finding Excessive Current Draw

Locating sources of excessive battery drain.

Charging System Voltage

Verifying the vehicle's charging system output.

Engine Sensors Tests

Fuse;Switch;Solenoid Tests

Fuses;Switches

Testing fuses and switches for continuity.

Solenoids;Relays

Checking the internal coil resistance of solenoids/relays.

Ignition System Tests

Fuel System Tests

Maintenance & Troubleshooting

Perfomance Tool W2969 Specifications

General IconGeneral
BrandPerfomance Tool
ModelW2969
CategoryMultimeter
LanguageEnglish

Related product manuals