UTILITY CUT-OFF TOOL
OWNER’S MANUAL
M563DB
SPECIFICATIONS:
Arbor Hole Size (IN.) ........................................... 3/8
Max. Cutting Capacity (IN.) ........................................1
Wheel Diameter (IN.) .............................................3
Air pressure (P.S.I.) .............................................90
Average air consumption (C.F.M.) ...................................4
Free speed (R.P.M.) ......................................... 22,000
Air inlet (N.P.T.)................................................ 1/4
Hose size (I.D.)..............................................3/8 in.
Specifications are subject to change without notice.
1 Housing 1
2 Muffle cover 1
3 Hosing adaptor 1
4 Trigger 1
5 Trigger pin 1
6 Safety pin 1
7 Safety stick 1
8 Spring 1
9 Valve bushing 1
10 O-Ring 1
11 O-Ring 1
12 Switch Pin 1
13 Spring 1
14 Air regulator 1
15 O-Ring 1
16 Nut O-Ring 1
17 Nut 1
18 Rear bearing 1
19 Rear cover 1
20 Fixed pin 1
21 Cylinder 1
22 Rotor blade 4
23 Rotor 1
24 Washer 1
25 Front cover 1
26 Front bearing 1
27 Grinding wheel shaft 1
28 Lock nut 1
29 Protective cover 1
30 Cover lock 1
31 Cutting wheel 1
32 Gasket 1
33 Screw 1
PARTS LIST
© Copyright 2018 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138
33
32
30
31
29
22
23
24
25
26
27
28
9
19
20
21
18
17
16
15
14
13
12
11
10
3
2
1
5
4
8
7
6
5
INDEX DESCRIPTION QTY INDEX DESCRIPTION QTY
REPLACEMENT PARTS: M579C 2Pcs Cutting Wheel Set
Only use cutting blades that are rated at 22,000 RPM or higher. Using substandard blades could cause
serious bodily injury, damage to work surface and surrounding area.
WARNING:
It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and
maintenance instructions contained on the product label and instruction manual prior to
operation of this product. The owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning
labels and while in use, maintaining the unit in good working order. If the owner and/or operator
are not fluent in English, the product warnings and instructions shall be read and discussed with
the operators’ native language by the purchaser/owner or his designee. Make sure that the
operator comprehends its contents. Safety information shall be emphasized and understood prior
to usage. The product shall be inspected per the operating instructions.
Users of this product must fully understand these instructions. Each person operating this product
must also be of sound mind and body and must not be under the influence of any substance that
might impair their vision, dexterity or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service department at:
1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time.
To Next Page
Need help?
General