Performance Tool M566DB User Manual

WARNING!
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE
OPERATING THIS TOOL. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY
AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.
1/4" Heavy Duty Die Grinder
OWNER’S MANUAL
Stock Number M566DB
SPECIFICATIONS:
Collet size (IN.).............................................1/8, 1/4
Air pressure (P.S.I.) .............................................90
Average air consumption (C.F.M.) ...................................4
Free speed (R.P.M.) ......................................... 22,000
Air inlet (N.P.T.)................................................ 1/4
Hose size (I.D.)..............................................3/8 in.
Length (IN.)................................................... 6.8
Weight (LBS) ................................................. 1.3
Specifications are subject to change without notice.

Performance Tool M566DB Specifications

General

Type	Angle Grinder
Motor	6.0 Amp
Voltage	120V
Power	720W
No Load Speed	11000 RPM
Wheel Diameter	4.5 inches
Wheel Thickness	1/4 inch
Arbor Size	5/8 inch

Summary

Owner's Manual and Specifications

Tool Specifications

Key technical details including collet size, air pressure, consumption, speed, inlet, hose size, length, and weight.

Important Safety Information

General Safety Precautions

Covers work area, personal attire, children, storage, eye protection, and safe operating practices.

Operating Safety Guidelines

Details on grip, work area clearance, alcohol/drugs, and proper air connection procedures.

Assembly, Air Source & Operation

Assembly and Installation Steps

Instructions for connecting the air coupler plug and ensuring air source compatibility.

Air Source Requirements

Recommendations for clean air, correct pressure (90 PSI), and maintaining dry air supply.

Operating Instructions

Guidance on applying pressure, avoiding excessive force, and recognizing operational issues.

Lubrication and Maintenance

Pre-Use Lubrication

Instructions for lubricating the air motor with 4-5 drops of air tool oil before each use.

Maintenance and Cleaning

Procedures for draining water, cleaning air filters, and flushing the tool with solvent or oil mixture.

Troubleshooting and Warranty

Troubleshooting Insufficient Power

Identifies causes like clogged passages, low air supply, or air leakage and provides solutions.

Limited Warranty Information

Details the manufacturer's warranty, exclusions, and limitations for purchasers.