Performance Tool W50079 - Operation Guide; Product Setup Instructions

To Next Page

To Previous Page

1. Steam Cleaner Unit

2. 6 in. Long, 5 in. Wide Nozzle

3. 6.5 in. Straight nozzle

4. 20 in. Flexible Nozzle Extension

5. Measuring Cup

6. Cloth towel Attachment

7. Funnel

8. 1 in. Brush Nozzle

9. 90º Angle Nozzle

10. 8 in. Squeegee Attachment

CONTENTS

OPERATION

Set Up

Unpacktheproduct,checktheaccessoriesandmanualsuppliedwiththeproductandensurethatthereareno

damaged or missing parts.

2. Beforeuse,pleasereadtheUserManualcarefully.Thesteamcleanerisnotdesignedforuseinindustrial

environments.Consultaprofessional.

3. Placethesteamcleaneronalevelplatform,pushdownthesafetycap,unscrewcapcounterclockwise,andthen

install the funnel.

4. Fillmeasuringcupwith6oz.(175ml)ofcleanwaterandaddthewaterintothetank.

NOTE: (Tank capacity is 8 oz. (250ml). Leave some excess space in the tank. Do not overll.

5. Re-installthesafetycapandtighten.

6. Pleaseinstallsuitableaccessoriesbeforeplugginginsteamer.

7. Checkthepowersupplyandsocket,andconrmtheycomplywiththerequirementsgivenintheUserManual.

Turn on the power supply.

8. Allowapproximately4minutesafterpowersupplyisturnedon,thenlightlypressthetriggertocheckforsufcient

steam.(Donotaimthespraynozzleatotherpersonsorobjects).

9. Ifthereissteamsprayedoutitisreadytouse.Presstriggerasneededtoreleasesteam.