Performance Road Bike

Need help?

Do you have a question about the Performance Road Bike and is the answer not in the manual?

Summary

Road Bike Assembly Preparation

Tools You Need for Assembly

Lists essential tools required for the safe and effective assembly of the road bike.

Unpacking and Initial Inspection

Instructions for safely opening the packaging and inspecting all components upon receipt.

Road Bike Component Installation

Install the Seatpost

Guide to installing the bicycle's seatpost, including proper lubrication and tightening procedures.

Install the Stem and Handlebar

Instructions for correctly attaching the stem and handlebars to the bicycle's steerer tube.

Install the Front Wheel

Procedure for properly mounting the front wheel onto the fork using the quick-release skewer.

Mount the Front Brake Caliper

Steps to securely attach the front brake caliper to the bicycle's fork crown.

Install the Front Brake Cable

Instructions for routing, tensioning, and securing the front brake cable to the caliper.

Install Pedals

Guide for greasing pedal threads and correctly installing them into the crank arms.

Final Assembly and Safety Checks

Inflate Tires

Information on inflating bicycle tires to the manufacturer's recommended pressure setting.

Install Reflectors

Instructions for attaching seatpost and handlebar reflectors using a screwdriver.

Final Operational Check

A checklist to ensure all bike components are secure and functioning properly before riding.