To Next Page
P
plindseyAug 18, 2025
Why is the wood burning when using my Performax 22-44 Plus?
- CCaitlin SmithAug 18, 2025
Wood burning during sanding with your Performax Sander can occur for several reasons: * The abrasive strip may be overlapped, in which case you should re-wrap it. * The depth of cut may be excessive; try reducing it. * The depth of cut may be too much for the grit you're using; switch to a coarser grit or reduce the depth of cut. * The feed rate may be too slow; try increasing it. * The abrasive may be loaded; clean it. * The abrasives may be worn; replace them.
General
