Perimatic Saga SGBS - Restore Defaults; Version

2DBarcodeScannerSettingManual V1.2
8/92
Restore Defaults
All barcode readers have a factory default setting. Reading the "Restore default
settings" barcode will restore all barcode reader property settings to the factory state.
You are most likely to use this bar code in the following situations：
1、Error in barcode reader settings, such as barcode not recognized.
2、You have forgotten what settings were made for the barcode reader before, and you
do not want to use the previous settings。
3、The bar code reader is set to use some infrequently used features and is used after
completion。
Restore default settings
version
Use the scanner to scan the version number bar code, you can view the current bar coder
version number information
version
www.perimatic.eu