Need help?Do you have a question about the Perkins 6.354(M) and is the answer not in the manual?
General| Displacement | 5.8 L (354 cu in) |
|---|---|
| Bore | 98.4 mm (3.875 in) |
| Stroke | 127 mm (5.0 in) |
| Aspiration | Naturally aspirated |
| Compression Ratio | 16:1 |
| Fuel System | Direct injection |
| Max Torque | 298 Nm at 1, 750 rpm |
| Cooling System | Water-cooled |
| Engine Type | 6-cylinder, 4-stroke diesel |
| Max Power Output | 86 kW (115 hp) at 2800 rpm |
Details on engine designations, cylinder count, capacity, and engine number locations.
Ensuring fuel is on, checking coolant and oil levels before engine start.
Instructions for starting warm and cold engines, including switch operations.
Steps to ensure the engine starts successfully in cold weather conditions.
Details on engine oil, gearbox oil, boost pressure, and water temperature gauges.
Daily, 150-hour, and 400-hour maintenance tasks for specific engine models.
Daily, 150-hour, 200-hour, 400-hour, and 2400-hour maintenance tasks.
Daily, 150-hour, 200-hour, 400-hour, and 2400-hour maintenance tasks.
Daily, 150-hour, 200-hour, 400-hour, 800-hour, and 2400-hour tasks.
Daily, 50-hour, 150-hour, 200-hour, 400-hour, 800-hour, and 2400-hour tasks.
Daily, 150-hour, 200-hour, 400-hour, 800-hour, and 2400-hour tasks.
Steps for initial engine checkover including oil, filter, and tightness checks.
Measures to protect the cooling system from frost damage using draining or anti-freeze.
A comprehensive chart listing engine faults and their potential causes.
To Next Page
