Wall
Anchor
D
P5
Drill pilot
holes
2A-2
3.75in 95 mm
Ø 10 mm
Ø 10 mm
2A-3
Concrete Wall
Concrete Wall
D
01
D
A
B
2A-1
Position the
wall plate
at your
desired
height , level
the wall plate
and mark the
pilot hole
locations.
01
WARNING:
Ensure the wall plate is securely fastened to the wall before
continuing on to the next step.
WARNING:
Avoid potential personal injuries and property damage!
● Mount the arm assembly/wall plate [01] directly onto the concrete surface
● Minimum solid concrete thickness: 203 mm (8 in.)
● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)
Install wall plate [01] using lag bolts [A]
and washer [B] and anchor [D].
Tighten the lag bolts until they are
pulled firmly against the wall plate [01].
To Next Page
Loading...