Perlick SHALLOW-DEPTH Series - Page 9

9
perlick.com
PERLICK RESIDENTIAL INSTALLATION MANUAL
SUPPORT
Pull door to
the side then lower door
Remove hinge pin
Hinge brackets
and mounting
screws
Hole plugs
Hinge brackets
and mounting
screws
5). Using the screws removed in step 3, install the top and
bottom hinge brackets from the kit (Fig. 9).
Hinge brackets
and mounting
screws
Hinge brackets
and mounting
screws
6). Remove the top and bottom door hinge brackets and
the push plunger brackets (Fig. 10). Retain the screws for
later use.
Hinge brackets
and mounting
screws
Figure 7. Door Removal
Figure 8. Hinge Removal
Figure 9. Hinge Installation
Figure 10. Door Brackets