Why is my Perlick SIGNATURE SOTTILE Refrigerator unit not running?
Your Perlick refrigerator might not be running because no power is going to the unit. Check if the home circuit breaker was tripped and reset it. Also, verify the ON/OFF keypad is turned on. If you have a Dual-Zone model, inspect the Dual-Zone power switch. Another potential cause is a dirty condenser, which requires cleaning.
Why are my Perlick Refrigerator compartments warmer than usual?
If your Perlick Refrigerator compartments are warmer than usual, several factors could be responsible. The control preset might be set too warm, so try lowering the setpoint temperature. Ensure the light isn't staying on by turning off the manual light switch. A dirty or obstructed condenser can also cause this issue, so clean the condenser and clear any obstructions. If the door has been opened frequently, wait 24 hours and recheck the temperature. Also, make sure that internal louvers and/or the fan guard are not obstructed. If warm product was recently placed inside, allow 24 hours for it to chill before rechecking the temperature.
Why is my Perlick Refrigerator system running for a long period of time?
Your Perlick Refrigerator might run for extended periods due to several reasons. A dirty or obstructed condenser can cause this, so clean the condenser and clear any obstructions. If the door was kept open for a long time, opened more frequently, or warm product was recently placed inside, wait 24 hours and recheck the temperature. Also, high ambient temperatures can cause the system to run more frequently, which is normal.
Why is there condensation forming inside my Perlick Refrigerator compartments?
Condensation inside your Perlick Refrigerator compartments can be normal due to high humidity or frequent door openings. Ensure the door is closing and sealing properly, and check the door seal; replace it if necessary.
What to do if the light stays on when the door switch is closed on my Perlick SIGNATURE SOTTILE?
If the light stays on in your Perlick Refrigerator when the door switch is closed, first check if the manual switch is on and turn it off. Also, make sure the door closes tightly, making contact with the door switch.
How to fix no interior light in Perlick Refrigerator?
If there is no interior light in your Perlick Refrigerator, start by checking if the bulb is loose and tighten it. If that doesn't work, the bulb might be burnt out, so replace it.
What does it mean if the LED Controller display is flashing “HA”* on my Perlick SIGNATURE SOTTILE Refrigerator?
If the LED Controller display on your Perlick Refrigerator is flashing “HA”*, it means the internal compartment has exceeded the high temperature alarm preset value for over 30 minutes. Ensure the door is completely closed, check the door gasket seal (and replace if needed), and clean the condenser if necessary. Also, make sure the louvered plate is unobstructed. If the surrounding ambient temperature has recently changed dramatically, the compartment temperature may be affected. Ensure the interior light is off and if warm product was recently placed in the cabinet, wait 24 hours for it to chill and then recheck the temperature.
What does it mean if the LED Controller display is flashing “LA”* on my Perlick SIGNATURE SOTTILE?
If the LED Controller display on your Perlick Refrigerator is flashing “LA”*, it indicates that the internal compartment has exceeded the low temperature alarm preset value for over 30 minutes. Make sure the door is completely closed and check the door gasket seal, replacing it if necessary. Also, consider if the surrounding ambient temperature has recently changed dramatically, as this could affect the compartment temperature.
What to do if LED controller display is flashing "HA" on Perlick Refrigerator?
If the LED controller display on your Perlick Refrigerator is flashing "HA," it indicates that the internal compartment temperature has exceeded the preset high-temperature alarm for more than 30 minutes. Here's what you can do: * Ensure the door is completely closed. * Inspect the door gasket seal and replace it if needed. * Check and clean the condenser. * Make sure the louvered plate is unobstructed. * Verify the interior light is off. * If warm items were recently added, allow 24 hours for chilling before rechecking the temperature.
Why light stays on when door switch is closed in Perlick Refrigerator?
If the light in your Perlick Refrigerator stays on even when the door switch is closed, it could be due to the manual switch being activated. Turn the manual switch off. Alternatively, the door might not be making proper contact with the door switch. Ensure the door closes tightly.
General| Brand | Perlick |
|---|---|
| Model | SIGNATURE SOTTILE Series |
| Category | Refrigerator |
| Language | English |
To Next Page