Need help?Do you have a question about the PERMASTEEL 80QT and is the answer not in the manual?
Secure the four legs to the main body using M6x13mm bolts, leaving them slightly loose.
Connect cross members to the legs using M6x13mm bolts, maintaining loose fittings for alignment.
Attach the bottom shelf to the legs and then fully tighten all previously loosened bolts.
Screw the casters, including those with brakes, into the leg frames using the provided open-end wrench.
Remove and re-attach the lid knobs to the lid, ensuring they are oriented correctly.
Secure the side handles to the main body using M6x16mm bolts and the Allen wrench.
Mount the bottle opener with M6x13mm bolts and the cap catcher with M6x13mm shoulder bolts.
Attach the drainage plug to the body, ensuring rubber gaskets are properly sealed for leak prevention.
General| Brand | PERMASTEEL |
|---|---|
| Model | 80QT |
| Category | Accessories |
| Language | English |
To Next Page
