Need help?Do you have a question about the Perreaux PMF1150B and is the answer not in the manual?
100Wrms per channel, both channels driven into 8Ω, 20Hz-20kHz at <0.009% THD.
0.009% from 0.25W to rated power.
0.009%.
Unmeasurable.
With music, > 3.0dB.
> 350W per channel into 8Ω.
120Vp-p per channel.
7.5A continuous per channel (fuse limited).
Typically < 1µs.
-0.1dB from 10Hz-3MHz @ 1W.
+1° at 20Hz -1° at 20kHz.
> 500kHz @ 1W.
> 60dB 20Hz-20kHz.
100dB below rated output 20Hz-20kHz (unweighted).
> 500 from 10Hz-1kHz.
1.5Vrms for rated output @ 1kHz.
47kΩ.
Width: 483mm (19.0"), Height: 133mm (5.3"), Depth: 356mm (15.0").
15.0kg (33.0lb).
Audio Performance| power output | 100 Wrms per channel into 8Ω |
|---|---|
| total harmonic distortion | 0.009% |
| intermodulation distortion | 0.009% |
| dynamic headroom | > 3.0 dB |
| amplifier saturation | > 350 W per channel into 8Ω |
| voltage swing | 120 Vp-p per channel |
Electrical Characteristics| maximum current output | 7.5 A continuous per channel |
|---|---|
| rise time | < 1 μs |
| bandwidth | -0.1 dB from 10Hz-3MHz @ 1W |
| phase response | +1° at 20Hz -1° at 20kHz |
| open loop frequency response | > 500 kHz @ 1W |
| channel separation | > 60 dB 20Hz-20kHz |
Noise and Sensitivity| hum and noise | 100 dB below rated output 20Hz-20kHz |
|---|---|
| damping factor | > 500 from 10Hz-1kHz |
| input sensitivity | 1.5 Vrms for rated output @ 1kHz |
| input impedance | 47 kΩ |
Weight and Dimensions| width | 483 mm (19.0”) |
|---|---|
| height | 133 mm (5.3”) |
| depth | 356 mm (15.0”) |
| weight | 15.0 kg (33.0 lb) |
To Next Page
