Need help?Do you have a question about the Perreaux PMF1050 and is the answer not in the manual?
Details the model number, date of manufacture, product type, and power output.
Covers power output, THD, IMD, dynamic headroom, saturation, voltage swing, and current output.
Includes bandwidth, phase response, rise time, channel separation, and hum/noise levels.
Details damping factor, input impedance, input sensitivity, driver stage, and output devices.
Specifies suitability for driving high-quality stereo headphones.
Provides the overall width, height, depth, and weight of the amplifier.
Power| power output at 8Ω | 100Wrms per channel |
|---|---|
| power output at 4Ω | 160W per channel |
| maximum current output | 7.5A continuous per channel |
| voltage swing | 108Vp-p per channel |
Distortion and Noise| total harmonic distortion | 0.03% |
|---|---|
| intermodulation distortion | 0.03% |
| hum and noise | 100dB below rated output 20Hz-20kHz |
Frequency Response| uncompensated bandwidth | 0.1dB from 10Hz-300kHz @ 1W |
|---|---|
| phase response | +2° at 20Hz -2° at 20kHz |
| channel separation | > 60dB 20Hz-20kHz |
Physical Specifications| width | 432mm (17.0”) |
|---|---|
| height | 89mm (3.5”) |
| depth | 340mm (13.5”) |
Weight and Impedance| weight | 12.0kg (27.0lb) |
|---|---|
| input impedance | 47kΩ |
| damping factor | > 500 from 10Hz-1kHz |
To Next Page
