Need help?Do you have a question about the Perreaux SM3 and is the answer not in the manual?
Pre-Amplifier Input Specifications| input sensitivity (high gain, moving coil) | 175μVrms @ 1kHz |
|---|---|
| input sensitivity (low gain, moving magnet) | 1.8mVrms @ 1kHz |
| input sensitivity (compact disc) | 350mVrms |
| input impedance (high gain, moving coil) | 47kΩ |
| input impedance (low gain, moving magnet) | 47kΩ |
| input impedance (compact disc) | 20kΩ |
| input overload (high gain) | 120mVrms @ 1kHz |
| input overload (low gain) | 900mVrms @ 1kHz |
| rated output | 1.5Vrms into 10kΩ or higher |
Output and Impedance| maximum output | 27Vrms into 10kΩ or higher |
|---|---|
| main output, source impedance | 470Ω |
| tape output level | 110mV |
| source impedance | 2kΩ |
| minimum recommended load impedance | 10kΩ |
Distortion and Noise| distortion (phono inputs) | 0.005% 20Hz-20kHz rising to 0.01% before overload |
|---|---|
| distortion (all others) | less than 0.0009% 20Hz-20kHz at rated output |
| noise (phono, high gain, unweighted) | -64dB re rated input |
| noise (phono, high gain, A weighted) | -72dB re rated input |
| noise (phono, low gain) | -86dB re 10mV input |
Frequency and Phase| frequency response (output stage) | 20Hz-50kHz, ±0.25dB |
|---|---|
| channel separation | 70dB 20Hz-20kHz |
| phase accuracy | ±1° 20Hz-20kHz |
Weight and Dimensions| width | 483mm (19.0") |
|---|---|
| height | 55mm (2.5") |
| depth | 347mm (13.6") |
| weight | 6.0kg (13.0lbs) |
To Next Page
