To Next PageTo Next Page
Need help?Do you have a question about the Pertici UNIVER 402IP and is the answer not in the manual?
Machine use requires expert personnel, adherence to manual, and compliance with safety standards.
User's electrical system must meet CEI 64-8; use original spare parts and contact authorized service.
Operator must be trained; check for debris and wear before each job; use safety equipment.
Guidelines for safely placing, securing, and the space required around the machine.
Pre-operation checks include work surface, debris, blades, pressure, and safety hook-ups.
Step-by-step guide for performing cutting operations with the machine.
How to use the emergency stop button and details on workpiece interlock devices.
Important safety measures for the operator to follow during machine use.
General| Blade Diameter | 400 mm |
|---|---|
| Motor Power | 2.2 kW |
| Spindle Speed | 2800 rpm |
| Cutting Capacity at 90 degrees (Square) | 120 x 120 mm |
| Cutting Capacity at 45 degrees (Square) | 85 x 85 mm |
| Voltage | 400 V |
