Peruzzo FOX 1200 User Manual

VIA VALSUGANA,26 - CURTAROLO - PADOVA - ITALY - TEL. 049/9620477
MANUALE USO E MANUTENZIONE
USE AND MAINTENANCE MANUAL
BEDIENINGS- EN ONDERHOUDSHANDLEIDING
HANDBUCH ZUM BETRIEB UND ZUR WARTUNG
Venditore / Dealer / Verdeler / Verkäufer : ________________________________________________________
Data di consegna / Delivery date / Leveringsdatum / Lieferdatum : _____________________________________
Proprietario o utilizzatore : _____________________________________________________________________
User or owner : _____________________________________________________________________________
Eigenaar of gebruiker : _______________________________________________________________________
Eigentümer oder Betreiber : ___________________________________________________________________
N.B. : Questa parte del manuale deve essere completata al momento della conse gna o installazione ; è
importante citare i numeri sopra riportati in ogni comunicazione con il vostro rivenditore.
This manual part must be filled in at delivery or installation; it is important to cite the numbers above
mentioned for any communication on enquiry with your dealer.
Dit gedeelte van het handboek moet ingevuld worden op het moment van levering of installatie. Het is van
belang de hierboven vermelde nummers op te geven telkens wanneer u uw verdeler contacteert.
Dieser Teil des Handbuchs soll bei der Lieferung oder bei der Aufstellung der Maschine ausgefüllt werden;
im Geschäftsverkehr mit Ihrem Händler müssen obigen Daten agegeben werden.
Trinciaerba
Falil Mower
Grasmaaier
Schlegelmäher
Modello/Model:
FOX - FOX S
Macchina:
Machine:
Machine :
I
GB
NL
D
Mod. FOX 1000 Code: 05026000
Mod. FOX 1200 Code: 05027000
Mod. FOX 1400 Code: 05045000
Mod. FOX 1600 Code: 05028000
Mod. FOX S 1200 Code: 05100000
Mod. FOX S 1600 Code: 05101000

Peruzzo FOX 1200 Specifications

General

Weight	160 kg
Number of blades	2
Lifting System	Hydraulic
Working width	1200 mm
Cutting Width	1200 mm
Overall width	130 cm

Summary

Foreword and Identification

Identification Note

Machine identification plates and symbols.

Warranty

Product warranty terms and conditions.

Machine Usage and Setup

Safety Regulations

Essential safety rules for machine operation.

Pre-Operation Checks

Checks and advice before starting the machine.

Fitting to the Tractor

Safe procedures for attaching the machine to a tractor.

Adjusting Cutting Height

Adjusting the cutting height for optimal results.

Tractor Release

Safe steps for detaching the machine from the tractor.

Manual Side Offset

How to manually adjust the machine's lateral position.

Hydraulic Side Offset

Instructions for hydraulic lateral adjustment.

Vertical Cutting

Procedure for vertical cutting and thatch removal.

Maintenance and Troubleshooting

Maintenance Schedule

Periodic maintenance schedule and tasks.

Belt Tension Adjustment

Adjusting drive belt tension.

Flail Replacement

Replacing flails (knives).

Winter Storage

Machine storage procedures.

Machine Transport

Safe transport guidelines.

Technical Information

Signaling Labels

Information on safety and warning labels on the machine.

Technical Characteristics

Detailed machine specifications and performance data.

Getting Rid of the Machine

Procedures for safe disposal of the machine.

Spare Parts List

List of available spare parts with codes.

Technical Advantages

Technical and economic benefits of the machine.