Peruzzo FOX 1400 - User Manual

VIA VALSUGANA,26 - CURTAROLO - PADOVA - ITALY - TEL. 049/9620477
MANUALE USO E MANUTENZIONE
USE AND MAINTENANCE MANUAL
BEDIENINGS- EN ONDERHOUDSHANDLEIDING
HANDBUCH ZUM BETRIEB UND ZUR WARTUNG
Venditore / Dealer / Verdeler / Verkäufer : ________________________________________________________
Data di consegna / Delivery date / Leveringsdatum / Lieferdatum : _____________________________________
Proprietario o utilizzatore : _____________________________________________________________________
User or owner : _____________________________________________________________________________
Eigenaar of gebruiker : _______________________________________________________________________
Eigentümer oder Betreiber : ___________________________________________________________________
N.B. : Questa parte del manuale deve essere completata al momento della conse gna o installazione ; è
importante citare i numeri sopra riportati in ogni comunicazione con il vostro rivenditore.
This manual part must be filled in at delivery or installation; it is important to cite the numbers above
mentioned for any communication on enquiry with your dealer.
Dit gedeelte van het handboek moet ingevuld worden op het moment van levering of installatie. Het is van
belang de hierboven vermelde nummers op te geven telkens wanneer u uw verdeler contacteert.
Dieser Teil des Handbuchs soll bei der Lieferung oder bei der Aufstellung der Maschine ausgefüllt werden;
im Geschäftsverkehr mit Ihrem Händler müssen obigen Daten agegeben werden.
Trinciaerba
Falil Mower
Grasmaaier
Schlegelmäher
Modello/Model:
FOX - FOX S
Macchina:
Machine:
Machine :
I
GB
NL
D
Mod. FOX 1000 Code: 05026000
Mod. FOX 1200 Code: 05027000
Mod. FOX 1400 Code: 05045000
Mod. FOX 1600 Code: 05028000
Mod. FOX S 1200 Code: 05100000
Mod. FOX S 1600 Code: 05101000

Summary

Machine Usage and Safety Precautions

General Usage Guidelines

Critical Safety Warnings

Warns about using the machine on gravel, with people, and modifications.

Machine Application and Safety

Machine Application Details

Flail Knife Types

Machine Operation and Safety

Machine Usage and Safety Measures

General Safety Regulations

Road Circulation Safety

Operator Protection Measures

Safety Rules for Machine Operation

Machine Safety Guidelines

Field Inspection for Safety

Ground Condition Considerations

Safety Provisions for Machine Use

Pre-Operation Checks and Safety

Essential Pre-Operation Checks

Lists essential checks to perform before starting the machine.

Immediate Action on Vibration

Warns about stopping immediately if vibration is detected.

Machine Operation Checks

Pre-Operation Checks

Lists essential checks to perform before starting the machine.

Tractor Hitching Procedure

Hitching Safety Precautions

Warns that hitching is dangerous and requires safety distance.

Mounting the Machine to the Tractor

Safety During Tractor Mounting

Emphasizes safety during the tractor mounting process.

Fitting the Machine to the Tractor

Connecting the Machine to the Tractor

Adjusting Cutting Height

Adjusting Cutting Height Settings

Safety Before Height Adjustment

Mandates engine off, brake applied, and PTO disconnected before adjustments.

Tractor Release Procedure

Detaching the Machine from the Tractor

Manual Side Offset Adjustment

Manual Side Adjustment

Hydraulic Side Offset Operation

Hydraulic Side Adjustment

Caution for Hilly Ground Offset

Failures, Troubles, and Solutions

Faults, Problems, and Solutions

General Maintenance Procedures

Periodic Maintenance Schedule

Details maintenance tasks based on working hours.

Maintenance and Servicing

Periodic Maintenance Tasks

Details maintenance tasks based on working hours.

Driving Belt Tension Adjustment

Driving Belt Replacement

Belt Tensioning and Alignment

Belt Replacement Procedure

Flail Replacement Guide

Safety During Flail Replacement

Replacing the Knives

Machine Transport Safety

Machine Transport Guidelines

Vertical Cutting Functionality

Vertical Cutting for Lawn Care

Peruzzo FOX 1400 Specifications

General

Working Width	1400 mm
Weight	240 kg
Number of Blades	2
Cutting Width	1400 mm
Working Position	Rear