What to do if Pet Stop Pet Care Product receiver is not detecting the signal?
First, ensure that the transmitter is powered on and emitting a radio signal. Next, verify that the receiver battery has been recently replaced and correctly installed. If the problem persists after these steps, it's recommended to contact your local Pet Stop dealer.
Why is my Pet Stop Pet Care Product transmitter beeping and the display flashing?
Ensure each boundary wire is correctly connected to the terminal connections on the transmitter. Also, check the boundary wire in the yard for any damage. You can quickly test this by placing a jumper wire across the loop connections on the transmitter. If the transmitter functions normally with the jumper wire, there's a break in the boundary wire. Visually inspect for the break or contact your Pet Stop dealer for assistance.
What to do if my pet is not responding to the correction from Pet Stop OT-300?
Check the fit and snugness of your pet’s receiver collar, ensuring the soft probes make good contact with your dog’s skin. Verify that the receiver battery was recently replaced and properly inserted. If your receiver uses Comfort Contacts[®] with rubber tips, make sure they are replaced, potentially as often as every six months, depending on your pet.
General| Brand | Pet Stop |
|---|---|
| Model | OT-300 |
| Category | Pet Care Product |
| Language | English |
Important restrictions on using the system with aggressive animals, as a physical barrier, or by children.
Key steps like collar fit, battery replacement, and proper training are necessary for system function.
Advises on daily collar removal to prevent irritation and cautions against unauthorized system modifications.
Details surge protection and Zapp Alert warning for lightning-related damage.
Explains the transmitter's sensor for detecting broken boundary wires.
Describes how to adjust the signal field width using transmitter buttons.
Instructions for powering the transmitter on and off for extended periods.
Details advanced features like RF interference filtering, low battery alerts, Safety Stop, and TriScann antenna.
Step-by-step guide for attaching the receiver collar to the dog's collar.
Guidance on ensuring proper collar fit for effective contact and comfort.
Instructions for battery replacement and information on maintenance plans.
Discusses pet maturity, leash comfort, and training multiple pets separately.
Explains how pets react to training and troubleshooting common issues.
Provides a method for walking the dog outside the property boundary.
Addresses problems like no display and beeping/flashing indicators.
Covers detection problems, lack of response to correction, and low battery indicator.
Outlines warranty periods and exclusions for various transmitter models.
Details warranty terms and exclusions for receiver models.
To Next Page
