your Petcube Bites camera will automatically activate the Night Vision mode.
9. Volume control
To configure the volume level on the Petcube Bites, please open the Petcube App
on your device, open the Petcube App, go to the ‘Home’ menu on the left, select
‘Settings’ at the bottom, and adjust the volume level under ‘Camera Sound &
Volume.’
Keep in mind that in order to be able to change the settings on your Petcube
Bites, it needs to be in standby mode (steady white light).
10. Sound alert at the start of a call
To attract your pet’s attention and be aware of when someone connects to your
Petcube Bites in accordance with your sharing settings, at the start of every call
your Petcube Bites will play a sound alert. This can be easily switched off in the
‘Settings’ menu in the Petcube App.
11. Motion and sound detection
If you are not using Petcube Care cloud-based video storage service, the Petcube
App can send push notifications to your smartphone whenever motion or
sound is detected on your Petcube Bites. To enable push notifications, open the
Petcube App, go to the ‘Home’ menu on the left, select ‘Settings’ at the bottom
and switch on ‘Motion Detection’ and ‘Sound Detection’.
Keep in mind that in order to be able to change the settings on your Petcube
Bites, it needs to be in standby mode (steady white light).
To Next Page
Loading...
