‘Disconnect Camera’ and confirm your choice by selecting ‘Delete’.
18. Moving your Petcube Bites to a different location
As long as Petcube Bites is within range of your wireless network, you can
reposition it according to your needs.
However, if you’re trying to use it in a different Wi-Fi environment or want to
connect the camera to a different wireless network, you need to change the Wi-Fi
settings in the Petcube App.
To do that, open the Petcube App, go to the ‘Home’ menu on the left, select
‘Settings’, then ‘Wi-Fi’ and follow the steps on the screen.
19. Connecting Petcube without using Wi-Fi
The Petcube Bites has no Internet access and can be connected to the Internet
only through a Wi-Fi network.
20. Changing Wi-Fi settings or connecting the Petcube to a different
network
If you need to either change the Wi-Fi settings in your Petcube App or connect
it to a different network, please open the Petcube App, go to the ‘Home’ menu
by pressing the Petcube logo in the upper left corner, select ‘Settings,’ tap ‘
Wi-Fi’. Power up your Petcube Bites, wait until it starts up, take a pin and push
the start button on the bottom for 3 seconds until the light changes to pulsing
green. Follow the steps on your screen.
To Next Page
Loading...
