GETTING STARTED
iOS Setup
Petcube Bites requires
To setup your Petcube Bites, download Petcube application to your iOS device.
The Petcube app requires iOS 8.4 or greater and can be downloaded in the App
Store or at the link below.
Connect your Petcube Bites to a power source and wait up to 30 seconds until
the LED light starts pulsing green. Open the Petcube app on your iOS device,
log in or sign up for a Petcube account using your email or Facebook account.
Go to the ‘Home’ tab, select ‘Connect your Petcube device’ and pick Petcube
Bites from the list of options. Keep in mind that you may be asked to turn on
Bluetooth. When the LED light on the camera is pulsing green, hit Next. To
identify the device, press ‘Select’ below the image of Petcube and hit ‘Next’ again
when the LED starts pulsing green rapidly. Wait for the app to exchange data
with the Petcube Bites and scan for available Wi-Fi networks, then select your
home Wi-Fi network from the list, put in your network password and hit ‘Join’.
If you don’t see your home network on the list or if you’re using a hidden
network, connect to your home Wi-Fi by entering the name of your network and
password manually and then hit ‘Join’ (keep in mind that it is case sensitive).
Once the LED light on your Petcube Bites changes to solid white, you are ready
to connect to your Petcube Bites.
www.petcu.be/ios-app-download
4
To Next Page
Loading...
