Petdwell ON2PETS - Assembly Instructions; Parts Identification; Base and Trunk Assembly; Perch and Stability Check

ASSEMBLY INSTRUCTIONS
PAR TS
LARGE ROD (x1)
BASE (x1)
PERCH (x1)
BASE TRUNK (x1)
STEP
2
2B
Make tree stable by
rotating the perch until
completely tightened,
while stepping on base.
Place perch (C2) over
base trunk (B2).
Make sure the small
wooden circle ts inside
the trunk, press down
and rotate until tight.
2A
Important Reminder: Please rotate perch
until completely tightened so that perch
locks into place and cannot be rotated
any further. The tree must be completely
stable prior to cat's rst use.
STEP
1
Screw large rod (A1)
into the base (B1)
until tight.
1B
Adjust base (B1)
using the four
leveling guides
underneath to
ensure base is
stable and level.
1A
Place base trunk
(B2) in the
wooden circle
on base (B1).
1C