Copyright © 2019, Petique, Inc., All Rights Reserved.
|
4
|
ATTENTION: Bedside Lounge must be fully
assembled and securely locked before
installing or using other accessories.
1) Undo the two (2) fasten straps and set
frame aside (Fig. 1).
Undo the two (2) remaining fasten straps
in order to separate the two (2) Mattress
Pads which are already attached onto
Pet Pads.
2) Keep the frame legs close together. On
the bottom of all four feet of the frame
insert the wheels
(Fig. 2).
NOTE: pull on each wheel to ensure that
it is securely locked and attached.
TO ASSEMBLE BEDSIDE LOUNGE:
Frame
Metal Tubes (3)
Mattress Pad on Pet Pad (2)
x4
Fig. 1
Fig. 2
Remove Bedside Lounge from box. The Bedside Lounge frame, metal tubes
and wheels need to be installed prior to use.
To Next Page
Loading...