6
SETUP AND INSTALLATION
The Petnet SmartFeeder setup and installation takes 3-5 minutes.
To get started, you’ll need the following four items:
SmartFeeder setup takes about 5 minutes.
1
2
3
Install the Petnet App
Register your SmartFeeder
Connect to your Wi-Fi
WI-FI
NOTE: The SmartFeeder works with Wi-Fi 802.11 b/g/n (2.4GHz) only.
Visit www.petnet.io/support for more guides and videos.
SMARTPHONEPET FOODSMARTFEEDER
To Next Page
Loading...
