Petri? V6 - FILM LOADING; Opening the Camera Back; Pulling out the Knob; Film Loading Procedure

Ope ni ng the Camera Bac k
Pull down the lever with your
thumbnail to open the
Cam era Back . At the same
time , the Film Number Indi ·
cator automatically returns
t o zero.
FILM LOADING
6
Pull ing out the Knob
Pull out the FILM REWIND
KNOB on
the top of camera .
This is to allow the film cas·
sette to be put into the
cassette chamber .
Film Load ing
Slip the film end into an y
slit on the Take·up Spool and
slide it down toward the bot ·
tom of the camera body , and
check that the film perfora -
tion is properly engaged with
the tooth of camera sprocket.