Need help?Do you have a question about the Peugeot Motorcycles Scoot'elec and is the answer not in the manual?
General| Category | Scooter |
|---|---|
| Manufacturer | Peugeot Motorcycles |
| Model | Scoot'elec |
| Motor Type | Electric |
| Power | 2.8 kW |
| Voltage | 48V |
| Top Speed | 45 km/h |
| Front Brake | Disc |
| Rear Brake | Drum |
| Seat Height | 780 mm |
| Battery Type | Nickel-Cadmium |
| Range | 40 km |
| Weight | 115 kg |
| Ampere-hours | 100 Ah |
Details specific identifiers for the machine, including model code and VIN.
Lists fluid capacities for components like the relay module.
Provides key physical measurements of the scooter, such as length, width, and wheelbase.
Specifies the overall weight of the scooter.
Details tyre sizes and recommended pressures for front and rear wheels.
Identifies the motor type and its specific designation.
Information related to the scooter's frame, including plate location and VIN.
Outlines servicing operations and intervals for machines used under harsh conditions.
Details required checks for diagnostic readout, controls, and tyre condition.
Specifies components that require periodic replacement, such as brake linings and drive belts.
Identifies items needing both inspection and potential replacement, like motor brushes.
Procedure for testing the machine, specifically on-road checks.
Step-by-step guide for battery initial setup and ongoing care.
Instructions for connecting the charger, initiating the charging process, and adding water.
Procedure to wake up the battery after extended periods of inactivity.
Instructions for connecting the diagnostic tool to the scooter for various functions.
Final inspection checklist before delivering the scooter to the user.
Details the function of the coded immobiliser system for security.
Information on charging the Cadmium-Nickel batteries via the on-board charger.
Explains the possibility of partial charging and its impact on range.
Describes how high battery temperature affects charging time and indicates process status.
Lists specific torque values for various fasteners on the scooter body and frame.
Torque specifications for frame-related components like wheel spindle nuts.
Torque values for motor mounting and related electrical connections.
General tightening torques for common bolt and nut sizes.
Lists part numbers for specialized tools required for specific operations.
Procedure to detach the lower body fairings using screws.
Instructions for removing the footboard by undoing screws.
Steps to detach the saddle by removing bolts.
Guide to removing the saddle cover and its locking mechanism.
Crucial steps for safely disconnecting the battery terminals before further work.
Procedure for detaching the onboard charger unit from the scooter.
Steps to safely access and remove the main 200 Amp fuse.
Detailed instructions for removing the Electronic Control Unit (ECU) and backing up parameters.
Procedure for adjusting the throttle sensor to ensure correct operation.
Step-by-step guide for the physical removal of the battery pack.
Note on discharging cells separately before replacement using a discharge bench.
Correct sequence and orientation for installing battery cells and connecting them.
Procedure for detaching the main power unit from the scooter chassis.
Instructions for accessing and potentially replacing motor brushes on Leroy-Somer motors.
Steps to detach the motor mounting rod and the main stand.
Guide for disassembling the belt and pulley system.
Procedure for detaching the motor from its casing and notes on replacement.
Instructions for removing the speed sensor and its securing clamp.
Steps to drain and remove the relay module, including cover and shafts.
Specific steps for removing the shafts from the relay module assembly.
Procedure for removing the keypad from the dashboard assembly.
To Next Page
