26-05-2003
YOUR 206 IN DETAIL
78
REAR SEATS
To fold the rear seats:
– lift the front of the seat cushion 1,
– tilt the seat cushion 1 against the front seats,
– position the seat belt under the belt holder 2,
– pull control 3 to unlock the seat back 4,
– remove or lower the head restraint,
– tilt the seat back 4.
Always start with the seat, never the seat back (risk of damage).
When repositioning:
– fold up the seat back,
– fold back the seat cushion,
– reposition the lap belt and the buckles before locking the front of the seat cushion.
Take care not to trap the seat belts.
To Next Page
Loading...
Need help?
General
